CONTENTS

M5StickC PLUS2

SKU:K016-P2

Description

M5StickC PLUS2 is an iterative version of M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip as the main controller with built-in WiFi functionality. The compact device integrates a wealth of hardware resources within its small form factor, including infrared, RTC, microphone, LED, IMU, buttons, buzzer, and more. It boasts a 1.14-inch TFT screen with a resolution of 135*240, driven by the ST7789V2. The battery capacity has been increased to 200mAh, and the interface also supports HAT and Unit series products. This compact and versatile development tool is designed to spark limitless creative possibilities.

M5StickC PLUS2 facilitates the rapid prototyping of IoT products, streamlining the entire development process. Even beginners in programming can easily build interesting applications and apply them to real-life scenarios using M5StickC PLUS2.

Power on:
Wake up can be started by pressing "BUTTON C" for more than 2 seconds, or IRQ signal triggered by RTC regularly. After triggering the wake up signal, the hold(G4) pin needs to be set to a high level (1) in program initialization to maintain the power supply, otherwise the device will enter the shutdown state again.
Power off:
When no USB external power supply is available, press BUTTON C for more than 6 seconds. Or when there is no USB external power supply, set HOLD(GPIO4)=0 in the program operation, that is, to achieve power off. When the USB is connected, press the "BUTTON C" button for more than 6 seconds to turn off the screen and enter the hibernation state, but not power off.

Tutorial

UIFlow UIFlow
UIFlow
This tutorial will show you how to control M5StickC PLUS2 devices through the UIFlow graphical programming platform
UIFlow2.0 UIFlow2.0
UIFlow2.0
This tutorial will show you how to control the M5StickC PLUS2 device through the UIFlow2.0 graphical programming platform
Arduino IDE Arduino IDE
Arduino IDE
This tutorial will show you how to program and control M5StickC PLUS2 devices through Arduino IDE

Features

  • ESP32-­PICO-­V3-­02-Base，support WiFi
  • Built-in 6-Axis IMU
  • IR transmitter
  • Microphone
  • RTC
  • Buttons, LCD(1.14 inch)
  • Built-in Lithium Polymer Battery@200mAh
  • Extendable Socket
  • Built-in Passive Buzzer
  • Wearable & Wall mounted
  • Compatible with multi-platform development:

Includes

  • 1x M5StickC Plus2

Applications

  • Internet of things terminal controller
  • Wearable devices
  • Stem education product
  • DIY creation

Specification

Resources Parameters
ESP32 ESP32-PICO-V3-02
240MHz dual core,support wifi,2 MB SPI PSRAM,8 MB SPI flash
PSRAM 2 MB PSRAM
Flash 8 MB flash
Power Input 5V @ 500mA
Port TypeC x 1, GROVE(I2C+I/0+UART) x 1
LCD screen 1.14 inch, 135*240 Colorful TFT LCD, ST7789v2
Button Custom button x 3
Power indicator LED GREEN LED(non-programmable)
MEMS MPU6886
Buzzer built-in buzzer
MIC SPM1423
RTC BM8563
Battery 200mAh @ 3.7V
Antenna 2.4G 3D Antenna
PIN port G0, G25/G36, G26, G32, G33
Operating Temperature 0°C to 40°C
Case Material Plastic ( PC )
Product Size 48*25*13mm
Package Size 114*64*23mm
Product Weight 17g
Package Weight 24.8g

Driver Installation

Click the link below to download the driver that matches the operating system. There are currently two driver chip versions, CP34X (for CH9102 ) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. if If the program cannot be downloaded normally (the prompt is overtime or Failed to write to target RAM), you can try to reinstall the device driver.

Driver name Applicable driver chip Download link
CH9102_VCP_SER_Windows CH9102 Download
CH9102_VCP_SER_MacOS v1.7 CH9102 Download

EasyLoader

EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.

Download Windows Version Easyloader

PinMap

RED LED & IR Transmitter & BUTTON A & BUTTON B

ESP32 GPIO19 GPIO37 GPIO39 GPIO35 GPIO2
IR Transmitter Transmitter Pin
BUTTON A Button Pin
BUTTON B Button Pin
BUTTON C Button Pin
Buzzer Buzzer Pin

TFT LCD

Driver IC:ST7789v2

Resolution:135 * 240

ESP32 GPIO15 GPIO13 GPIO14 GPIO12 GPIO5 GPIO27
TFT LCD TFT_MOSI TFT_CLK TFT_DC TFT_RST TFT_CS TFT_BL

GROVE PORT

ESP32 GPIO22 GPIO21 5V GND
GROVE port SCL SDA 5V GND

MIC (SPM1423)

ESP32 GPIO0 GPIO34
MICROPHONE SPM1423 CLK DATA

6-Axis posture sensor (MPU6886) & RTC BM8563

ESP32 GPIO22 GPIO21
6-Axis IMU sensor SCL SDA
BM8563 SCL SDA

Schematic

schematics

Examples

Arduino

Module Size

module size

Version Change

Release Date Product Change Note:
/ Initial public release /
2021.12 Added hibernation and wake-up functions, and changed version to v1.1 /
2023.12 The power management chip AXP192 was cancelled, and the main control chip was changed from ESP32-PICO-D4 to ESP32-PICO-V3-02, and the switching mode was different The version is changed to v2

The difference between M5StickC PLUS and M5StickC PLUS2

schematics

Hardware difference

Product Name SoC Power management Battery Capacity Memory UART Chip Body Color
M5STICKC PLUS ESP32-PICO-D4 AXP192 120mAh 520KB SRAM and 4MB Flash CH522 orange red
M5STICKC PLUS2 ESP32-PICO-V3-02 \ 200mAh 2MB PSRAM and 8 MB flash CH9102 orange

Pin difference

Product Name IR LED TFT BUTTON A BUTTON B BUTTON C(WAKE) HOLD Battery Voltage Detection
M5STICKC PLUS G9 G10 MOSI(G15) CLK(G13) DC(G23) RST(G18) CS(G5) G37 G39 Normal buttons, non-programmable / Read via AXP192 configuration
M5STICKC PLUS2 G19 G19 MOSI(G15) CLK(G13) DC(G14) RST(G12) CS(G5) G37 G39 G35 G4 G38

The difference between turn on and off

Product Name Power on Power off
M5STICKC PLUS Press the reset BUTTON (BUTTON C) for at least 2 seconds Press the reset BUTTON (BUTTON C) for at least 6 seconds
M5STICKC PLUS2 It can be started by pressing "BUTTON C" for more than 2 seconds, or IRQ signal triggered by RTC regularly. After triggering the wake up signal, it is necessary to set the hold(G4) pin to high level (1) in program initialization to maintain the power supply, otherwise the device will enter the shutdown state again. When no USB external power supply is available, press BUTTON C for more than 6 seconds. Or when there is no USB external power supply, set HOLD(GPIO4)=0 in the program operation, that is, to achieve power off. When the USB is connected, press the "BUTTON C" button for more than 6 seconds to turn off the screen and enter the hibernation state, but not power off.

Since M5StickC PLUS2 has cancelled the PMIC power management chip AXP192, the switching mode will be different. As mentioned in the beginning of the article, the operation is the same, so the library files supported by the program will also be different. Both the Wi-Fi signal and the infrared signal are stronger than before.

Video

  • M5StickC PLUS2 features